SCHMIDT® Flow Sensor SS 20.600
| Description | Article-Number | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Basic sensor | SCHMIDT® Flow Sensor SS 20.600; output signal 4 … 20 mA and 0 … 10 V; impulse output, incl. Pressure-tight stainless steel compression fitting | 524 600 - | A | B | C | D | E | F | G | H | PP |
| Options | |||||||||||
| Mechanical type | Sensor length 120 mm | 1 | |||||||||
| Sensor length 250 mm | 2 | ||||||||||
| Sensor length 400 mm | 3 | ||||||||||
| Sensor length 600 mm | 4 | ||||||||||
| Special lengths (> 120 mm to 1,000 mm): length: _____ mm | 8 | ||||||||||
| Remote sensor: - Sensor length (120 / 250 / 400 / 600 mm): _____ mm - cable length (1 … 10 m; division 0,1 m): _____ m |
9 | ||||||||||
| Pressure-tight compression fitting, stainless steel G ½ | 1 | ||||||||||
| Pressure-tight compression fitting, stainless steel R ½ (P T) | 2 | ||||||||||
| Measuring ranges and calibration |
Measuring range 0 … 10 m/s | 1 | |||||||||
| Measuring range 0 … 20 m/s | 2 | ||||||||||
| Measuring range 0 … 60 m/s | 3 | ||||||||||
| Measuring range 0 … 90 m/s | 4 | ||||||||||
| Measuring range 0 … 140 m/s | 5 | ||||||||||
| Measuring range 0 … 220 m/s | 6 | ||||||||||
| Special measuring range (10 … 220 m/s) in 0,1 m/s steps: _____ , _____ m/s | 9 | ||||||||||
| Standard adjustment | 1 | ||||||||||
| High-precision adjustment incl. ISO calibration certificate | 2 | ||||||||||
| Standard adjustment check with conversion factor for methane 1) | 3 | ||||||||||
| Standard adjustment with conversion factor for biogas (60 % methane, 40 % CO2) 1) | 4 | ||||||||||
| Standard adjustment with conversion factor for CO2 1) | 5 | ||||||||||
| Standard adjustment with conversion factor for special gases and mixture 1) | 9 | ||||||||||
| Impulse output | Standard 100 Hz (= final value of measuring range wN) | 1 | |||||||||
| 1 impulse / 1 m3 for pipe diameter (round) _____ mm | 2 | ||||||||||
| 1 impulse / 0,1 m3 for pipe diameter (round) _____ mm | 3 | ||||||||||
| 1 impulse / 0,01 m3 for pipe diameter (round) _____ mm | 4 | ||||||||||
| Additional outputs | Without communications module | 1 | |||||||||
| Communications modules for Modbus, DeviceNet, Profibus | * | ||||||||||
| Protection type ATEX | Without ATEX design (SS 20.600) | 1 | |||||||||
| ATEX design (SS 20.600 EX) 1) | 2 | ||||||||||
| Protection type | Standard application | 1 | |||||||||
| Grease-free and for O2 > 21 % 1) | 2 | ||||||||||
| Overpressure | Operating pressure DD: 00 (atmospheric) … 16 bar | 00 … 16 | |||||||||
| Operating pressure DD: 17 … 40 bar1) | 17 … 40 | ||||||||||
* On request
1) Not available in combination with the options "special length" and / or "fat-free and O2“
